The Zero CO2 solar-powered LED light bar illuminates your indoor and outdoor spaces with clear, bright, natural light. It’s the perfect solution for when you need brilliant light with no power connection required. The LED light bar combined with our solarMAX panel battery pod for reliable light each night.

  • Built to last up to 50,000 hours
  • CRI of 80 for real colours
  • Strong and waterproof
  • High-quality sealed unit so insects can’t get into the light
  • Plug-and-play, a standard Australian plug is supplied fitted for immediate use
  • Cleverly designed to allow for a variety of flexible combinations for permanent or temporary installations
  • It can be ceiling- or wall-mounted with a simple robust bracket
  • The light can also be pendant-mounted by using the same clips to bring the light to the exact height you want
  • Multiple lights can also be hung from brackets that can hold two, three or five light bars
  • Excellent heat dissipation
Customised light systems

Zero CO2 Light bar specifications

Power: 30 W
Beam angle: 110˚
CRI: ≥80
Weight: 1.60 kg
Width: 3 cm, height: 6 cm, length: 122 cm
Lux / luminous flux: 8460 lm; luminous efficacy: 141 lm/W
Colour temperature: 5000 K
Weather rating: IP 66; lifetime: ≥50,000 hours; material: aluminium
Ambient operating temperature: -20°C to +45°C

solarMAX solar light power pod

The pod is a true professional grade all-in-one system: pre-wired, programmed and assembled into a plug-and-play unit ready for you to install.

The solarMAX solar light power pod is equipped with the latest lithium ion LiFePO4 batteries.

The solar panels are made of the highest quality materials to ensure high efficiency and long-lasting performance. The solar pod is an all-in-one system. It is equipped with a 240 Wh battery that will power one light bar for more than 12 hours by itself.

Each of our solar pod lights is compatible with the others, allowing you to create your own custom lighting systems to illuminate an interior or exterior.
Additionally, all our lights are designed to plug-and-play, allowing them to be installed quickly and easily wherever you need them. The battery is removable and it can also be charged by a 240 V charger if required.

There is no electrician needed, reducing installation cost. Suitable for permanent and temporary installations. It includes a fully installed ready-to-use folding mount to get the correct angle for charging by the panel.

We can fully customise your lighting set-up to meet your needs. With our Australian R&D we can make your customised lights to order in small production runs.

co2 emmission
led task light bar
light bars
led light bars

Solar panel specifications

Solar cell: mono crystal 125×78 mm with 36 cells
Dimensions: 89×67×3 cm
Frame: aluminium alloy
Surface glass: 3.2 mm, high transmittance, low iron, tempered glass
Maximum Power (Pmax): 80 Wp
Maximum Power Voltage (Vmp): 18 V
Maximum Power Current (Imp): 3.33 A
Open-Circuit Voltage (Voc): 21.4 V
Short-Circuit Current (Isc): 3.78 A
System Voltage: 1000 V Tolerance 3±

Battery specifications

Nominal capacity: 240 Ah; dimensions: 28x15x8 cm
Weight: 3 kg; battery cell: lithium LiFePO4 battery
Time to fully charge: 6–8 hours*; battery life: 3 years
Cycle life: 1000 times; maximum charge/discharge current: 5 A
Standard discharge current: 2 A; nominal voltage: 1.8 V
Max charge voltage: 16.8 V; discharge cut-off voltage: 12.0 V
Operating temperature: 0⁰C to +45⁰C; relative humidity: 10% to 90%
Max Power Point Tracking (MPPT) System

Note: *The time the battery could be fully charged under the effective illumination of the solar panel.

Get in touch!

Contact us today for more information about our range. Call our Australian team and we’ll be right there to help; or send us an email at